【Natural Sound Recording】The SYNCO shotgun microphone D30 uses a unique interference tube in combination with the acoustic design of slanting air vents to produce greater off-axis noise suppression and frequency response. It enhances the audio details in low frequency and optimizes the sound in middle frequency, resulting in a clear, crisp, and natural audio output.
【High Sensitivity】SYNCO on-camera mic D30 offers a stepless analog gain control dial that may be adjusted in the linear range from -10dB to 15dB. You may control the exact amount of gain rise or reduction as required in a subtle manner. The great sensitivity of -24dB±2dB allows it to collect very small audio waves and provide clear and accurate sound.
【Real-time Audio Monitoring】A 3.5mm TRS headphone port is utilized to monitor what the final soundtrack will sound like in real time. D3 is compatible with headphones with a 55 Ohm impedance to monitor sounds for saving energy. You can get continuous monitoring for 5-8 hours.
【75Hz/150Hz Low Cut】D30 is compact, durable and budget, being a an external microphone for camera with a wide range of compatibility. It creates very minimal self-noise due to its extremely low-noise circuitry. The sound is further purified by a 75Hz/150Hz optional low cut filter, which removes the majority of low-frequency noise generated by wind, vibration, electrical current, or traffic. Depending on the setting and use need, you can pick between a 75Hz or 150Hz low cut.
【Aluminium Alloy Design & Wide Usages】The D30 is an anti-interference device made of aluminum alloy. It can work with DSLR, camcorder, mirrorless camera, recorder, smartphone, tablet, laptop, and bodypack transmitter, and is perfect for TV, cinema, and documentary recording thanks to a universal Type-C output port and Type-C to 3.5mm TRS/TRRS cables.
【Dual Sound Tracks Protection】When the sound recording exceeds the Max. SPL of 124dB SPL, an included overdrive protection mechanism safeguards it against distortion. The safety channel makes sure that your audio is not disrupted or lost at the peak of SPL with the attenuation of 20dB.
|Transducer:||Back Electret Condenser|
|Polar Pattern:||Super Cardioid|
|Frequency Response:||20 Hz to 20 KHz|
|Dynamic Range (Typical):||119dB SPL (A-weight per IEC651)|
|Signal/Noise:||82dB(1KHz at 1Pa)(A-weight per IEC651)|
|Sensitivity:||-24dB±2dB (1dB=1V/Pa at 1kHz)|
|Maximum SPL:||124 dB SPL|
300Ω±20% (at 1KHz) (Line out).
|Low Frequency Roll-off:||75Hz/150Hz|
|Output Interface:||Type-C to 3.5mm|
- Opens in a new window.