A snowboard helmet intercom makes it easier to stay connected with friends on the slopes. You can plan your next run and share quick updates without stopping to check your phone. This guide covers:

  • What is a snowboard helmet intercom?
  • What makes it useful for snowboarders?
  • Key features to consider when choosing an intercom
  • Top picks for different snowboarding groups
  • How to install an intercom on a snowboard helmet
A woman wearing a helmet with a snowboard helmet intercom and snowboarding eyewear.

What is a snowboard helmet intercom?

A snowboard helmet intercom is a wireless communication device designed for use with snowboard helmets. It typically includes a main unit, helmet speakers, and a microphone. Unlike regular Bluetooth headsets, it is built for helmet installation and the demands of snowy conditions.

Key design features include:

👉 Helmet-friendly fit: Speakers fit inside compatible helmet ear pads, with a microphone positioned near your mouth.

👉 Cold-weather performance: A suitable operating temperature range and reliable battery performance help keep the intercom working in freezing conditions.

👉 Snow and moisture protection: Water-resistant construction helps protect the device from melting snow and moisture.

Why do snowboarders use it instead of other communication devices?

Snowboarders can use various communication devices to stay connected, but not all of them are as convenient for communicating on the slopes.

✨ Smartphones: Mobile coverage can be unreliable in remote mountain areas. Taking out your phone to make a call or send a message also means stopping your ride.

✨ Handheld radios: Many models use push-to-talk controls and need to be carried separately. This can be inconvenient when wearing thick gloves or riding downhill.

✨ Regular wireless headphones: Most are designed for music and phone calls rather than direct group communication. They may also lack a secure, integrated fit inside a snowboard helmet.

✨ General communication headsets: Some support two-way or group communication, but not all are designed for helmet installation or cold, snowy conditions.

Overall, a snowboard helmet intercom is the most practical solution for snowboarding communication: It combines hands-free group communication without cellular coverage with a secure, helmet-friendly fit for active movement on the slopes.

What to look for before buying a snowboard helmet intercom?

Before buying, look for these features in a helmet intercom for snowmobiling: protection against snow and cold, communication range and group capacity, voice clarity in windy conditions, ease of use with gloves, and compatibility with your helmet.

Waterproofing for snowy conditions

Look for at least IPX4 water resistance to protect the helmet intercom against melting snow. Also check the operating temperature range. A model rated for -10°C or lower is worth considering.

Intercom capacity and range

For 2-4 snowboarders, a basic Bluetooth group intercom feature is enough. For larger groups, Mesh communication and automatic reconnection are useful. A communication range of 1,000–2,000 meters can be useful when your group spreads out across the slopes.

Audio clarity and wind noise reduction

Look for advanced noise reduction to reduce background noise picked up by the microphone. A wind-resistant microphone can also help your voice come through more clearly.

Glove-friendly controls

Thick snowboarding gloves make small buttons difficult to operate. Choose a snowboard helmet intercom with large raised buttons or a rotary dial that you can find and use by touch.

Helmet compatibility

Snowboard helmets vary in their ear-pad design and available speaker space. Check whether the speakers fit into the helmet's ear-pad pockets without pressing against your ears.

What to use: Top helmet intercoms for snowboarding at Moman Store

Whether you're snowboarding with one buddy or a larger group, we offer three options for everyone to stay connected across the slopes.

Quick comparison of 3 helmet intercoms for snowboarding

Here's a quick comparison table of the three models to help you find the right fit for your snowboarding group.

Moman H2S Moman CP-S Moman CP-X
Intercom users Up to 2 Up to 8 Up to 24
Communication range Up to 1,000 m Up to 2,000 m Up to 2,000 m
Communication technology Bluetooth Bluetooth Mesh
Noise reduction ENC + DSP + CVC DSP + CVC ENC + DSP + CVC
Weather resistance IPX4 IP65 IPX4
Operating temperature -20°C to 50°C -20°C to 50°C -20°C to 50°C
Battery life Up to 25 hours Up to 28 hours Up to 10.5 hours
Price (single pack) $49 $79 $69

Moman H2S: Best for two-person snowboarding with ENC noise reduction in windy conditions

Price: $49 (single pack)

Shop Moman H2S snowboard helmet communication with a knob at Moman.

Overview: The Moman H2S is a snowboard helmet intercom for snowboarding with a friend or instructor. It keeps you connected within a range of up to 1,000 m. Its triple noise reduction system also helps keep conversations clearer when wind picks up during downhill rides. With an operating temperature as low as -20°C, it's also suited to cold mountain conditions.

Pros

🟢 Up to 1,000 m communication range allows two snowboarders to spread out on the slopes.

🟢 ENC, DSP, and CVC noise reduction help improve voice clarity.

🟢 The rotary knob is easier to locate and operate with winter gloves.

Cons

🔴 Supports only up to 2 users

Moman CP-S: Best for small-group snowboarding with IP65 protection against snow

Price: $79 (single pack)

Shop Moman CP-S snowboard Bluetooth helmet intercom with a snake-head look at Moman.

Overview: The Moman CP-S helps up to 8 snowboarders stay connected over distances of up to 2,000 m, so they can share updates, check where everyone is, and decide where to meet after a run. Its IP65-rated protection also helps guard against water exposure from wet and melting snow.

Pros

🟢 Supports up to 8 users within 2km, ideal for small snowboarding groups.

🟢 IP65-rated protection is ideal for snowy outdoor conditions.

🟢 Physical large buttons are easier to press with winter gloves.

Cons

🔴 Bluetooth communication supports up to 8 users, so it is less suitable than Mesh for larger snowboarding groups.

Moman CP-X: Best for large-group snowboarding with reliable mesh communication

Price: $69 (single pack)

Shop Moman CP-X helmet intercom for snowboarding with a knob at Moman.

Overview: The Moman CP-X is the best snowboard helmet intercom option for groups of up to 24 riders, thanks to its Mesh communication. Everyone can share updates and plan where to meet after a run. If a rider temporarily loses connection behind a ridge or around a bend, the intercom automatically reconnects when they return within range.

Pros

🟢 Mesh communication supports up to 24 riders, making it a good fit for large snowboarding groups.

🟢 A communication range of up to 2,000 m helps riders stay connected on the mountain.

🟢 ENC, DSP, and CVC noise reduction help improve voice clarity during group conversations.

🟢 The rotary knob and buttons are easier to locate and operate with winter gloves.

Cons

🔴 Up to 10.5 hours of battery life may be limiting for longer days on the slopes.

How to install an intercom on your snowboard helmet?

Installing a snowboard helmet intercom is straightforward with the right setup. The following steps use the Moman H2S as an example and apply to most helmet intercoms from other brands and models, though mounting methods and cable connections may vary.

A snowboard helmet is placed with the helmet intercom components, including microphone, control unit, speakers and a mounting base.

Step 1: Install the speakers in the ear pads

Attach the speaker tape kits to the helmet's ear pads or designated speaker pockets. Secure the speakers to the tape kits, then tuck the cables neatly under the removable padding.

Step 2: Position the microphone near your mouth

Connect the boom microphone to the speaker cable. Use the included tape kit to secure the microphone cable along the inside of the helmet. Position the microphone near your mouth without interfering with the chin strap or eyewear.

Step 3: Attach the mounting base for the control unit

Choose a mounting method that works with your helmet.

Option A: adhesive mounting base

  • Choose a flat area on the helmet's outer shell, away from vents and other attachments.
  • Attach the adhesive mounting base and press it firmly into place. Allow the adhesive to set according to the manufacturer's instructions.

Option B: clip-on mounting base

  • Use the included hex key to loosen the screw and separate the mounting base.
  • Position the back clip over a compatible helmet edge.
  • Close the clip and tighten the screw.

Step 4: Secure the intercom unit and tuck away the cables

Slide the intercom unit into the mounting base's slot until it locks securely. Connect the headset cable to the appropriate port on the unit, then tuck away any excess cable.

Step 5: Test the intercom before hitting the slopes

Put on the helmet and check that the speakers and microphone are correctly positioned and comfortable. Test the audio and communication functions before heading out.

Helmet intercoms, Snowboard

🎃 SCONTO DEL 20% SU TUTTO IL SITO — Scade il 30 ott. 🎃

Risparmia il 20% su macchine del fumo, interfacce per caschi, accessori per motociclisti, microfoni wireless, monitor per smartphone e molto altro.